Cave Diving

Our cave diving equipment is manufactured for world leading cave-diver Martin Farr.

The bags can be ordered through Farrworld

Or you can order directly from
Pinpoint Manufacturing.

CAVE DIVING BAG - SINGLE CYLINDER

This bag will accommodate 100 metres of SRT rope and/or is long enough to transport a single seven litre cylinder.

It has sufficient dimension to hold two four litre cylinders.

Dimensions: height 68cm, width 24cm
The shoulder straps are 50mm wide with adjustable metal buckles.

Grab handle on double reinforced piped base & our drainholes.

It has a central carry handle, 2 haul loops, one internal loop and drawcord.

See larger image......

CAVE DIVING BAG - DOUBLE CYLINDER

The "Expedition" Tackle Bag

This large, heavy duty bag will serve well in an "expedition-type" cave environment and prove ideal for bottle carrying. It is specifically designed to carry 2 x 7 litre cylinders above or below ground.

With a padded and shaped "yoke" style, the shoulder straps are altogether more comfortable than conventional tackle bags.

An additional, easily adjustable, waist band ensures stability while walking or scrambling and incorporates a high quality, stainless steel roller buckle.

Dimensions: height 70cms, width "shaped" 34cms.

The base has 5 x eyeleted drain holes and a webbing drag handle.

It has a side carry handle, 2 haul loops, secure piped lid closure with grab handle and drawcord.

See Larger Image......

HARNESS

The Explorer 1 Harness is based on the American side-mount system, commonly used in the UK, where the bottoms of the cylinders are fastened to stainless steel D-rings (such as A or B, the latter being moveable around the waist).

The bungee cord runs from (C), which can also be used to fix a wing; this clips to (B) while the harness is put on, and then moved under the arm to (D).

Dive reels may be attached to the lower D-ring (E).

Photograph from Chris Howes from "Diving in Darkness"